PACE TECHNOLOGY -- ZAP  -- 6810-00N059050
<pre>=====================  Product Identification  =====================

Product ID:ZAP
MSDS Date:11/07/1989
FSC:6810
NIIN:00N059050
=== Responsible Party ===
Company Name:PACE TECHNOLOGY
Address:9420 SANTA ANITA AVE
City:RANCHO CUCAMONGA
State:CA
ZIP:91730
Country:US
Info Phone Num:714-987-0550
Emergency Phone Num:714-987-0550
CAGE:IO984
=== Contractor Identification ===
Company Name:PACE TECHNOLOGY
Box:UNKNOW
CAGE:65230
Company Name:PACE TECHNOLOGY
Address:9420 SANTA ANITA AVE
Box:City:RANCHO CUCAMONGA
State:CA
ZIP:91730
Country:US
Phone:714-987-0550
CAGE:IO984

=============  Composition/Information on Ingredients  =============

Ingred Name:2-PROPENOIC ACID, 2-CYANO-, ETHYL ESTER;
    (ETHYL-2-CYANOACRYLATE)
CAS:7085-85-0
Fraction by Wt: 2-5% PPM
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITATES EYES, MUCOUS
    MEMBRANES. SIGNS & SYMPTOMS: TEARING FROM EYE IRRITATION AND MUCOUS
    MEMBRANES WITH SOME COUGHING. CHRONIC: NO RESIDUAL EFFECTS OF ACUTE
    PROPERTIES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE AND
    RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:INGEST: CALL MD IMMEDIATELY . SKIN: FLUSH W/COPIOUS AMOUNTS
    OF WATER. CALL MD . INHAL: REMOVE TO FRESH AIR. EYES: FLUSH AREAS
    OF CONTACT WITH WATER FOR AT LEAST 15 MINUTES. WIPE AWAY LIQUI D
    ADHESIVE WHERE POSSIBLE WITH RESIDUALS BEING REJECTED BY SOAKING IN
    WATER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:176F,80C
Extinguishing Media:FLUSH WITH LARGE AMOUNTS OF WATER OR DRY CHEMICAL
    EXTINGUISHER.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
    FUMES MAY BE IRRIT IF NOT BURNING & REQ AIR SUPPLY SYS W/GOGG WHILE
    APPLYING LG AMTS OF H*2O/DRY CHEM EXTING.
Unusual Fire/Explosion Hazard:NONE. COMBUSTIBLE REQUIRING THE ABOVE
    FIRE FIGHTING PROCEDURES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB WITH PAPER TOWELS OR CLOTH. SWEEP INTO
    TRAY FOR LIQUID TO BE REACTED WITH WATER FOR SOLID WASTE TREATMENT.
    AVOID OVER-EXPOSURE TO FUMES WITH LARGE SPILLS AND POOR
    VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID MOISTURE, DIRECT UV-SUNLIGHT AND
    DO NOT STORE ABOVE 25C. KEEP CONTAINERS CLOSED TIGHTLY WHEN NOT IN
    USE. IDEAL STORAGE IS AT 5-10 C.
Other Precautions:AVOID BREATHING VAPOR, CONTACT WITH EYES AND SKIN. DO
    NOT STORE AT -5 C WHICH FREEZES PRODUCT TO USELESS STATE. PRODUCT
    NOT DAMAGED BY FREEZING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORMALLY NOT NECESSARY. A NIOSH/MSHA APPROVED
    ORGANIC VAPOR CANISTER MAY BE USED.
Ventilation:LOCAL EXHAUST: TO ELIMINATE EYE IRRITATION. MECHANICAL
    GENERAL: LARGE QUANTITIES USED TO 2PPM.
Protective Gloves:PVC GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:APPRVD EMER EYE WASH & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA . NORMALLY NOT USED, HOWEVER, APRON (SUP DAT)
Work Hygienic Practices:SOAP AND WATER HELPS REMOVE ADHESIVE FROM SKIN.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER. OTHER PROT. EQUIP: PROTECTS CLOTHING
    FROM HARDENED GLUE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:149F,65C
Vapor Pres:1 @ 20C
Vapor Density:NIL-NE
Spec Gravity:1.05 (H*2O = 1)
Evaporation Rate &amp; Reference:NIL-NE (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSPARENT H*2O-WHITE TO STRAW COLORED LIQUID
    STIMULATIVE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
POLYMERIZED BY WATER, ALCOHOL, AMINES, ALKALINE MATERIALS AND DIRECT
    UV.
Stability Condition to Avoid:EXCESSIVE HEAT ABOVE 176F., MOISTURE, AND
    ALKALINES.
Hazardous Decomposition Products:TYPICAL COMBUSTIBLE BY-PRODUCTS OF
    CARBON MONOXIDE AND DIOXIDE.
Conditions to Avoid Polymerization:STORE IN A COOL PLACE FOR BEST
    PROPERTIES AND SHELF LIFE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE SOLID COMBUSTIBLE WASTE OR DUMP AS
    CHEMICAL WASTE ACCORDING TO LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.